Below is a list of some of the compatible lug mount cameras that will work with our lug mount straps. It is not a full list, that would be extremely long. It is simply a list of some of the most popular cameras that are compatible with our Westminster, Kensington and Oxford camera neck and wrist straps.

Most of the below cameras will also be supplied by the manufacturer with a triangle shaped split ring that attaches to the lug mount. In that case, either our Westminster, Kensington straps, or our Borough strap will work just fine. If you don’t see your camera listed below, please contact us and we’ll do our best to determine which is the best strap for you.

Please note:

• We provide you with 2 sets of identical sized split rings. In case anything happens to one set, you’ll have another. We were the first leather camera strap company to provide 2 sets of rings. 

• There are literally hundreds of different camera models on the market. It would be impossible to make a leather camera strap that fits all camera makes and models in the same, exact way. We have chosen to use a thicker, 304 stainless steel split ring, instead of a thinner, less quality split ring.

Depending on the size of your camera’s lug mounts, you may find that the split ring glides through the lug and moves around, such as on most modern Nikon cameras. You may find, on smaller lug mount systems, such as Fuji and Sony, that the split ring attaches to the lug and rests in the middle of the single ring, instead of moving around in the lug. This can be alarming at first glance. However, all split rings that move and glide through the lug will end up on the single ring at some point, or another. We felt it was better to have a thicker, stronger ring, rather than a thinner ring that could make its way off the lug and damage your precious gear.

Both ways are completely fine. We have strength tested our split rings on the single ring to a weight of more than 30lbs without the rings breaking. We think it’s more important to have strong split rings that you can trust, than it is to have a split ring that glides through the lug, which is why we do not provide, or make a thinner split ring.

All of our lug mount straps will fit any camera system that uses a round, lug mount, including, but not limited to:

Film cameras: 

Canon: Canon AE-1, AV-1, EF, AT-1, F-1, Canonet models

Contax: Aria, G1, G2

Leica: M3, M2, M1, M4, M4-2, M4-P, M6, M6 TTL, M7, MP, M-A

Minolta: SRT 200/201, XE7, XG1, XG-M, XD7, XD11, XD5, Hi-Matic Rangefinder

Nikon EM, FE, FE2, FM, FM2, FM2N, FM3, FM3T, FM3A, F80, F100, F2, F3, F4, F5, F6, Rangefinder S3

Olympus OM1, OM2, OM10

Voigtlander Bessa M Rangefinders: RM2, RM3, RM4

Digital cameras:

Fuji: XQ2, X-T1, X-T2, X-T3, X-E1, X-E2, X-E2S, X-E3, X100, X100S/T/F, X-Pro 1, X-Pro 2, X10, X20, X30, X70, X-T10, X-T20, X-T30

Leica: Q, X, XE, X-Vario, D-Lux, CL, M, M8, M9, M10, Monochrom, M-P, M-D, M-A, MP

Nikon: D7000, D7100, D7200, D7500, D200, D300, D300s, D500, D600, D610, D700, D750, D800/E, D810/A, D850, D3, D3S, D3X, D4, D4s, D5, Df

Nikon 1 Compact: V1, V2, V3, J1, Coolpix A, DL18-50, DL24-85, DL24-500

Olympus: E-P1, E-P2, E-P3, E-PL5, E-PL6, E-PL7, E-PL8, E-PM1, E-PM2, OMD E-M10, OMD E-M10 Mark II, OMD E-M5, OMD E-M5 Mark II, OMD E-M1, OMD E-M1 Mark II, Pen-F, Traveller SH-2, Stylus 1s

Panasonic Lumix: DMC-LX100, DMC-G7, DMC-GF7, DMC-G80M, DMC-GX80, DMC-GX7, DMC-GX8, DMC-GH2, DMC-GH3, DMC-GH4, DMC-GH4R, DMC-FZ1000EB, DMC-FZ2000

Sony: Sony A7, Sony A7R, Sony A7RII, Sony A7RIII, Sony A7RIV, Sony RX1, Sony NEX 6, NEX 5R, NEX 7, a5000, a5100, a5200, a5300, a5400, a5500, a5600, a6000, a6100, a6200, a6300, a6400, a6500, a6600, a7000